skip to Main Content

Grind & Seal Concrete Floors

Grind and Seal is the place we Grind the Concrete to the ideal sum and afterward apply a surface covering to the floor to ensure the concrete floor. Granulate and seal can be utilized in any application requiring a low support, hardcore, UV and stain the safe floor. Coatings that can be utilized are Polyurethane, Acrylic, and Epoxy and furthermore come in Matt, Satin, Semi-Gloss, and Full Gloss. Grind and seal is a term utilized for the arrangement of applying a reasonable, defensive covering to concrete floors. It’s exactly what it seems like: this procedure granulates and afterward seals the ground surface. This framework happens after the concrete floor has just been sterilized. Under the procedure of grinding impurities and scratches are removed from the surface layer of concrete.

Grind & SealThis is cultivated utilizing powerful solid processors that rapidly and proficiently immerse the outside of the concrete with scratches. In the wake of crushing, a topical sealer is put on to secure the concrete floor. These fixing coats are generally made of epoxy, acrylic, or urethane.

Process of Polished Concrete Floors

In spite of the fact that this procedure is normally alluded to as “polished concrete,” there is a slight contrast among “grind and seal” and “grind and polish.” Grind and polish are solidified with a densifier and refined to a lot more significant level to make it glossy. This densifier then responds to the concrete to solidify the top layers. It’s at that point fixed with a clean gatekeeper sealer to stay away from any water, microorganisms, or stains. Grind and polish frameworks will, in general, be progressively costly however somewhat more durable.

A grind and seal floor from Singh Floors Melbourne, is a less expensive option in contrast to polished concrete, because of it being less work in installation and having a faster finish time. A grind and seal floor is basically that, a grind that comes in contact with the surface fixed with acrylic, epoxy or polyurethane covering. Sealer arrives in an assortment of hues and finishes the process of including matt, silk or high gloss. This covering should be reapplied after some time, around 4 – 8 years relying upon measure of utilization and traffic.

A Grind and the polish floor is a perfect option for carports, basements and open air zones. The expansion of a non-slip added substance is prescribed for regions that are vulnerable to climate components.


Give us a Call at: 0488880732
Back To Top
×Close search
Contact Us